18L Paint Drum Bottom Ends Customizable flange configurations
The Tinplate Paint Can Bottom Plate from HJ GROUP provides structural stability to paint containers. Manufactured using seamless deep-drawing technology, this plate offers:
● Uniform thickness distribution for load-bearing capacity
● Integrated bead reinforcement to prevent deformation
● Food-grade lacquer lining for compatibility with sensitive formulations
● Customizable flange configurations
Product specification
Technical data Sheet
|
Outside Diameter |
Curl Height |
Curl Openning |
Countersink Depth |
Compound Weight |
|
289.80-290.00mm |
2.40-2.60mm |
≥3.20mm |
7.80-8.20mm |
375-405mg |
Typical Application: Note: Making cans with DR materials, please pay a special attention to the rolling direction.
|
Remark |
Temper Grade |
Typical Application |
||
|
JIS G3303:2008 |
ASTM A623M |
EN10202:2001 |
||
|
Single |
T-1 |
T49 |
TS230 |
Drawn and ironed cans, nozzles, spouts, closures, mounting cups, oil filters. |
|
T-2 |
T53 |
TS245 |
Ring and plugs, dome tops, closures, shallow drawn parts. Drawing cans, bodies,ends for large can. |
|
|
T-2.5 |
T54 |
TS260 |
Battery shells, small can ends and bodies |
|
|
T-3 |
T57 |
TS275 |
Top and bottom of cans, can ends and bodies, large diameter closures, crown caps. |
|
|
T-3.5 |
T59 |
TS290 |
General use, pail ends,pail top caps, 18L, 4L |
|
|
T-4 |
T61 |
TH415 |
Can bodies and ends, crown caps, closures.Bodies and ends for small can. |
|
|
T-5 |
T65 |
TH435 |
Can ends and bodies requiring intensity.Bodies and ends for small can. |
|
|
Double |
DR-7M |
T71 |
TH520 |
DRD bodies, dome, Lug cap & 3 piece bodies |
|
DR-8 |
T72 |
TH550 |
DRD bodies, end, Lug cap & 3 piece bodies |
|
|
DR-8M |
T73 |
TH580 |
||
|
DR-9 |
T75 |
TH620 |
DRD bodies, Lug cap & 3 piece bodies |
|
|
DR-9M |
T76 |
- |
||
|
DR-10 |
- |
- |
DRD bodies, Lug cap & 3 piece bodies |
|