Group HJ, depuis 1993! Votre fournisseur de solutions à guichet unique.
18L Paint Drum Bottom Ends Customizable flange configurations
The Tinplate Paint Can Bottom Plate from HJ GROUP provides structural stability to paint containers. Manufactured using seamless deep-drawing technology, this plate offers:
● Uniform thickness distribution for load-bearing capacity
● Integrated bead reinforcement to prevent deformation
● Food-grade lacquer lining for compatibility with sensitive formulations
● Customizable flange configurations
Спецыфікацыя прадукту
Technical data Sheet
Outside Diameter | Curl Height | Curl Openning | Countersink Depth | Compound Weight |
289.80-290.00mm | 2.40-2.60mm | ≥3.20mm | 7.80-8.20mm | 375-405mg |
Typical Application: Note: Making cans with DR materials, please pay a special attention to the rolling direction.
Remark | Temper Grade | Typical Application | ||
JIS G3303:2008 |
ASTM A623M
| EN10202:2001 | ||
Single
| T-1 | T49 | TS230 | Drawn and ironed cans, nozzles, spouts, closures, mounting cups, oil filters. |
T-2 | T53 | TS245 | Ring and plugs, dome tops, closures, shallow drawn parts. Drawing cans, bodies,ends for large can. | |
T-2.5 | T54 | TS260 | Battery shells, small can ends and bodies | |
T-3 | T57 | TS275 | Top and bottom of cans, can ends and bodies, large diameter closures, crown caps. | |
T-3.5 | T59 | TS290 | General use, pail ends,pail top caps, 18L, 4L | |
T-4 | T61 | TH415 | Can bodies and ends, crown caps, closures.Bodies and ends for small can. | |
T-5 | T65 | TH435 | Can ends and bodies requiring intensity.Bodies and ends for small can. | |
Double
| DR-7M | T71 | TH520 | DRD bodies, dome, Lug cap & 3 piece bodies |
DR-8 | T72 | TH550 | DRD bodies, end, Lug cap & 3 piece bodies | |
DR-8M | T73 | TH580 | ||
DR-9 | T75 | TH620 |
DRD bodies, Lug cap & 3 piece bodies
| |
DR-9M | T76 | - | ||
DR-10 | - | - |
DRD bodies, Lug cap & 3 piece bodies
| |
1. Tinplate Paint Can Top Lid
2. Tinplate Paint Can Bottom Plate
Technical Innovations
● Hydroforming process ensures 100% leak-proof performance
● Anti-slip embossing for secure stacking
● Edge rounding treatment to eliminate sharp edges
● Double-seam welding technology for airtight and tamper-evident closure
● Raised flange design compatible with automated filling lines
● UV-resistant lacquer finish to prevent discoloration
● Manual or machine-applied options
Mots clés
● Endrôles du bas en filet, aliments peuvent sceller, solutions d'emballage d'aérosols, scellage hermétique, extrémités inférieures conformes à la FDA, extrémités alimentaires, emballage durable
● Classification: les fins inférieures