HJ Group, с 1993 года! Ваш универсальный поставщик решений для олова.
18L Paint Drum Bottom Ends Customizable flange configurations
The Tinplate Paint Can Bottom Plate from HJ GROUP provides structural stability to paint containers. Manufactured using seamless deep-drawing technology, this plate offers:
● Uniform thickness distribution for load-bearing capacity
● Integrated bead reinforcement to prevent deformation
● Food-grade lacquer lining for compatibility with sensitive formulations
● Customizable flange configurations
Məhsulun spesifikasiyası
Technical data Sheet
Outside Diameter | Curl Height | Curl Openning | Countersink Depth | Compound Weight |
289.80-290.00mm | 2.40-2.60mm | ≥3.20mm | 7.80-8.20mm | 375-405mg |
Typical Application: Note: Making cans with DR materials, please pay a special attention to the rolling direction.
Remark | Temper Grade | Typical Application | ||
JIS G3303:2008 |
ASTM A623M
| EN10202:2001 | ||
Single
| T-1 | T49 | TS230 | Drawn and ironed cans, nozzles, spouts, closures, mounting cups, oil filters. |
T-2 | T53 | TS245 | Ring and plugs, dome tops, closures, shallow drawn parts. Drawing cans, bodies,ends for large can. | |
T-2.5 | T54 | TS260 | Battery shells, small can ends and bodies | |
T-3 | T57 | TS275 | Top and bottom of cans, can ends and bodies, large diameter closures, crown caps. | |
T-3.5 | T59 | TS290 | General use, pail ends,pail top caps, 18L, 4L | |
T-4 | T61 | TH415 | Can bodies and ends, crown caps, closures.Bodies and ends for small can. | |
T-5 | T65 | TH435 | Can ends and bodies requiring intensity.Bodies and ends for small can. | |
Double
| DR-7M | T71 | TH520 | DRD bodies, dome, Lug cap & 3 piece bodies |
DR-8 | T72 | TH550 | DRD bodies, end, Lug cap & 3 piece bodies | |
DR-8M | T73 | TH580 | ||
DR-9 | T75 | TH620 |
DRD bodies, Lug cap & 3 piece bodies
| |
DR-9M | T76 | - | ||
DR-10 | - | - |
DRD bodies, Lug cap & 3 piece bodies
| |
1. Tinplate Paint Can Top Lid
2. Tinplate Paint Can Bottom Plate
Technical Innovations
● Hydroforming process ensures 100% leak-proof performance
● Anti-slip embossing for secure stacking
● Edge rounding treatment to eliminate sharp edges
● Double-seam welding technology for airtight and tamper-evident closure
● Raised flange design compatible with automated filling lines
● UV-resistant lacquer finish to prevent discoloration
● Manual or machine-applied options